KISS ESC 2-5S 25A 4in1 (40A limit)
32‑bit brushless motor controller delivering up to 160 A total across four channels with DShot2400 support and over‑current protection.
- Price
- €79.90indicative
- Origin
- Collected automatically
- Source
- Manufacturer page (flyduino.net) +1 more
- Retrieved
- 25 Sept 2026
- Last checked
- 25 Sept 2026
- Report
- Report an error or request removal
The KISS ESC25A provides precise RPM control for race multicopters, featuring over‑temperature and over‑current safeguards, regenerative braking, multiple throttle input modes (DShot, PWM, Oneshot) and full telemetry via the TLM line. It is compact at 37.5 × 42.5 mm.
General
- Propulsion
- Electric
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Physical
- Dimensions
- 37.5 x 42.5 mm
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
General
- MCU
- 32‑Bit ARM Cortex‑M4 @ 80 MHz
- Telemetry capabilities
- voltage, current, temperature, RPM
- Over‑current protection limit
- 40A
- Over‑temperature protection threshold
- 100°C
- Commutation type
- sinHybrid (sinwave/BackEMF Hybrid)
- DShot resolution steps
- 2000
- DShot frequency
- 2400Hz
- Auto timing advance per commutation
- 7.5-30°
- Maximum ERPM recommended
- 500000ERPM
- Hole distance compatibility
- 3 cm with 3‑4 mm size
- RPM control resolution
- 2000steps
- No extra capacitor needed for 3–5S
- Yes
- Throttle response
- fast and linear with active freewheeling
- Regenerative braking
- Yes
- Input modes supported
- Oneshot42, Oneshot125, PWM (25‑500 Hz) auto detected
- Receiver compatibility
- FrSky Sbus, Graupner SumD, TBS Crossfire, Multiplex SRXL, S-Port, Graupner HOTT, Sensorbus
- Operating voltage range
- 6‑24 V (2–5S)
- Maximum continuous current
- 25A
- Instantaneous maximum current
- 40A
- Copper PCB layers
- 6
- PCB copper thickness
- 70µm
- Input/Output protection voltage
- ~30 V over, ~–30 V under
- Capacitors onboard
- 1980 µF 25 V ceramic
- Firmware version
- v121a
- Sound editor version
- V1.0c
Values are normalised to SI-style units. Open a value's source marker for provenance and confidence. Additional specifications are shown as published by the source, without unit conversion. Spotted an error? Report it to us, tell the manufacturer or claim this listing.
- Firmware
- v121a
- Software & SDKs
- Firmware v121aSound Editor V1.0c
Ask Flyduino about KISS ESC 2-5S 25A 4in1 (40A limit)
A Series Modular Propulsion System
The A Series Modular Propulsion System is a modular UAV propulsion solution featuring advanced thermal management and multi-protocol support, designed to enhance flight performance for multirotor platforms.
GEK Engines
A low‑cost, high‑performance turbofan engine family designed to power cruise missiles and unmanned aerial vehicles.
KISS ESC 3-6S 32A (45A limit)
A 32‑bit brushless motor controller for race copters that delivers up to 32 A continuous current with an active 45 A limit, supports 3–6 S LiPo packs and DShot/ESC protocols.