TAG
The TAG family offers single‑, two‑ and three‑axis MEMS gyroscopes engineered for inertial stabilization in electro‑optical systems, gimbals and pointing platforms.
- Origin
- Collected automatically
- Source
- Manufacturer page (inertiallabs.com) +1 more
- Retrieved
- 25 Sept 2026
- Last checked
- 25 Sept 2026
- Report
- Report an error or request removal
These MEMS sensors provide high precision angular rate measurement with low non‑orthogonality and misalignment. They are factory calibrated across their operational temperature range, supported by calibration and acceptance test certificates, and undergo rigorous quality assurance procedures. The units are ITAR‑free, exportable under ECCN 7A994, and come equipped with software drivers for ROS, LabVIEW and Waypoint, as well as an SDK for custom integration.
Physical
- Dimensions
- SAG‑150 60×60×25 mm; TAG‑207 & TAG‑307 39×45×22 mm; TAG‑304 19.5×15.2×5.5 mm
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 75%
Collected automatically from the source; not reviewed yet.
Compliance/certification
- Export control notes / ECCN
- 7A994
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- High · 90%
Collected automatically from the source; not reviewed yet.
General
- Axes
- One (SAG‑150), Two (TAG‑207), Three (TAG‑307 & TAG‑304)
- Measurement Range
- SAG‑150 ±490°/s; TAG‑207 & TAG‑307 ±450°/s; TAG‑304 ±2000°/s
- Data Update Rate
- SAG‑150 1000 Hz; TAG‑207, TAG‑307 & TAG‑304 4000 Hz
- Bias In‑run Stability
- SAG‑150 0.02°/hr (Allan Variance, RMS); TAG‑207 & TAG‑307 0.7°/hr; TAG‑304 2°/hr
- Noise (ARW)
- SAG‑150 0.03°/√hour; TAG‑207 & TAG‑307 0.06°/√hour; TAG‑304 0.2°/√hour
- Weight (g)
- SAG‑150 165 g; TAG‑207 165 g; TAG‑307 165 g; TAG‑304 19.5 g
- Applications
- High‑precision electro‑optical systems, RWS, turrets, gimbals, line‑of‑sight and pan & tilt platforms; anti‑roll systems; optical image stabilization (2D/3D); virtual reality; guidance & navigation
Values are normalised to SI-style units. Open a value's source marker for provenance and confidence. Additional specifications are shown as published by the source, without unit conversion. Spotted an error? Report it to us, tell the manufacturer or claim this listing.
- Software & SDKs
- ROSLabVIEWWaypoint SDK
Ask Inertial Labs about TAG
BZGNSS BZ-181 GPS
C93-M8E
The C93‑M8E is a compact, integrated UDR (Untethered Dead Reckoning) receiver based on u‑blox's EVA‑M8E GNSS module, providing continuous vehicle positioning without speed sensor data and ready for immediate installation in automotive or UAV platforms.
Elios 3 Gas Sensor
