AHRS
The VectorNav IMU/AHRS supplies high‑rate, low‑noise inertial data for autonomous navigation in drones, missiles, and other platforms.
- Price
- Price on request
- Availability
- In production
- Lead time
- 1–4 weeks
- Origin
- Collected automatically
- Source
- Manufacturer page (vectornav.com) +1 more
- Retrieved
- 25 Sept 2026
- Last checked
- 25 Sept 2026
- Report
- Report an error or request removal
VectorNav’s IMU combines three‑axis accelerometers and gyroscopes to provide raw inertial measurements that feed into higher‑level attitude estimation and control loops. The device is available in Industrial (VN‑100) and Tactical (VN‑110) grades, offering gyro bias instability of about 10°/hr and 1°/hr respectively. It outputs up to 800 Hz IMU data and 400 Hz navigation data, with an operating temperature range from ‑40 °C to +85 °C.
Environment
- Min. operating temp.
- -40°C
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
- Max. operating temp.
- 85°C
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Compliance/certification
- Export classification
- Not controlled
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 75%
Collected automatically from the source; not reviewed yet.
Performance
- Sensor type
- MEMS IMU with 3‑axis accelerometers and gyroscopes
- Gyro bias instability (Industrial)
- 10°/hr
- Gyro bias instability (Tactical)
- 1°/hr
- IMU output rate
- 800Hz
- Navigation output rate
- 400Hz
Environment
- Operating temperature min
- -40°C
- Operating temperature max
- 85°C
Manufacturing
- Calibration method
- Unit‑level individual calibration across full temperature range
- Packaging options
- Surface‑mount, rugged enclosed module, IP‑rated aluminum enclosure
Availability
- Lead time (Industrial)
- < 1 week
- Lead time (Tactical)
- 3–4 weeks
Compliance
- Production certification
- AS9100D‑certified facility
Values are normalised to SI-style units. Open a value's source marker for provenance and confidence. Additional specifications are shown as published by the source, without unit conversion. Spotted an error? Report it to us, tell the manufacturer or claim this listing.
Ask VectorNav Technologies about AHRS
APNT
APNT solutions deliver resilient positioning, navigation, and timing in environments where GNSS signals are jammed, spoofed or unavailable, enabling mission-critical operations for defense, aerospace, and autonomous platforms.
Agam GNSS Base RTK
The Agam GNSS Base RTK is a UART‑based GPS/GNSS module featuring the u‑Blox ZED‑F9P receiver, designed for use as an RTK base or rover with multi‑constellation support and sub‑centimetre accuracy.
Agam GNSS01 CAN
The Agam GNSS01 CAN is a Made‑in‑India GPS/GNSS module built around the NEO‑M9N chipset, featuring an integrated IMU, barometer, magnetometer, safety switch and buzzer with a CAN interface for seamless integration into any CAN‑based autopilot.
