DEXI-10
The DEXI‑10 is a research-class quadcopter that integrates a full Raspberry Pi 5 and PX4 flight stack, can carry up to 1.36 kg of payload, and supports optical flow indoor/outdoor flight.
- Price
- Price on request
- Availability
- Pre-order
- Origin
- Collected automatically
- Source
- Manufacturer page (droneblocks.io) +1 more
- Retrieved
- 25 Sept 2026
- Last checked
- 25 Sept 2026
- Report
- Report an error or request removal
Designed as the top rung on DroneBlocks’ flight path, the DEXI‑10 provides a research-class airframe equipped with a PX4 1.17 flight controller, an optional GPS add‑on, a 4S LiPo battery, and a custom HAT hosting a Raspberry Pi 5. The platform offers five servo channels, GPIO, and an M.2 slot for future AI accelerators, while supporting optical flow hover in indoor and outdoor environments.
General
- Launch / recovery
- Vertical
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Payload
- Payload
- 1.4kg
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Communications
- Interfaces
- UART0 MAVLink, UART1 ROS 2 messages
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 75%
Collected automatically from the source; not reviewed yet.
Power
- Battery / fuel
- 4S LiPo battery + charger
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 75%
Collected automatically from the source; not reviewed yet.
Compliance/certification
- NDAA compliant
- Yes
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Low · 60%
Collected automatically from the source; not reviewed yet.
One kit. Research-ready.
- What's in every DEXI‑10
- Included
- Flight controller (PX4 1.17)
- ✓
- GPS module (add-on, coming soon)
- –
- 4S LiPo battery + charger
- ✓
- Raspberry Pi 5 + custom DroneBlocks HAT
- ✓
- Servo, GPIO and 5 V actuator control on the HAT
- ✓
- M.2 slot for an AI accelerator (module planned, not included)
- ✓
- Open DEXI OS (ROS 2 + vision)
- ✓
- DroneBlocks / Python / ROS 2 / C++ from day one
- ✓
- Computer vision & AI on the Pi 5
- ✓
- Optical-flow hover, indoors and outdoors
- ✓
Full Raspberry Pi 5 compute
- A complete Pi 5 on a custom DroneBlocks HAT
- more headroom than any other DEXI for vision, AI, and ROS 2.
GPIO with 5 V actuator output
- Five general-purpose pins for switching real hardware
- relays, solenoids, lights. A 5 V output drives them and an I2C connector takes sensors, so nothing needs a breakout board. TCA9555
Payload
- Camera
- included
Sensors
- Optical flow + range sensor
- included
Compute
- Onboard computer
- Raspberry Pi 5
Expansion
- AI accelerator slot
- M.2 M‑key, empty
Control
- Flight controller
- PX4 1.17
Values are normalised to SI-style units. Open a value's source marker for provenance and confidence. Additional specifications are shown as published by the source, without unit conversion. Spotted an error? Report it to us, tell the manufacturer or claim this listing.
- Software & SDKs
- PX4ROS 2
Ask DroneBlocks about DEXI-10
