EMLID Reach RS4
- Price
- £3,599indicative
- Availability
- In production
- Origin
- Collected automatically
- Source
- Manufacturer page (3dxr.co.uk) +1 more
- Retrieved
- 25 Sept 2026
- Last checked
- 25 Sept 2026
- Report
- Report an error or request removal
The Reach RS4 delivers sub‑centimetre RTK accuracy with a tolerance of 7 mm + 1 ppm and offers tilt compensation of 2 mm + 0.3 mm/°. It supports the full spectrum of GNSS constellations, including GPS, GLONASS, Galileo, BeiDou, QZSS and NavIC. The device is powered by a Li‑Ion battery that lasts up to 16 h on a single charge, features a USB‑Type C interface for charging, and is housed in a magnesium alloy body with an IP68 rating and operating temperature range of –40 °C to +65 °C.
Navigation
- GNSS
- GPS L1C/A, L2C, L5; GLONASS L1OF, L2OF; Galileo E1-B/C, E5a, E6; BeiDou B1I,B1C,B2a,B3I; QZSS L1C/A,L1C/B11,L2C,L5; NavIC L1-SPS Data, L5-SPS
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Environment
- Min. operating temp.
- -40°C
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
- Max. operating temp.
- 65°C
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
- IP rating
- IP68
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Power
- Battery / fuel
- Li‑Ion battery
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Compliance/certification
- Certifications
- IP68
Source
- Source
- Unknown source
- Retrieved
- 26 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- High · 90%
Collected automatically from the source; not reviewed yet.
General
- Please note that orders placed after 1
- 30 PM on Tuesday 29 September will not be dispatched until Monday 5 October.
- RTK Accuracy
- 7 mm + 1 ppm
- Tilt Compensation RTK
- 2 mm + 0.3 mm/°
All-band RTK GNSS receiver with tilt compensation
- RTK
- 7 mm + 1 ppm
- Tilt compensation
- RTK: 2 mm + 0.3 mm/°
- GLONASS
- L1OF, L2OF
- Galileo
- E1-B/C, E5a, E6
- BeiDou
- B1I, B1C, B2a, B3I
- QZSS
- L1C/A, L1C/B11, L2C, L5
- NavIC
- L1-SPS Data, L5-SPS
Satellites
- GPS Bands
- L1C/A, L2C, L5
- GLONASS Bands
- L1OF, L2OF
- Galileo Bands
- E1-B/C, E5a, E6
- BeiDou Bands
- B1I, B1C, B2a, B3I
- QZSS Bands
- L1C/A, L1C/B11, L2C, L5
- NavIC Bands
- L1-SPS Data, L5-SPS
Communication
- Base LoRa Frequency
- 915 MHz
- UHF Antenna Band
- 410–470 MHz
Power
- Battery Life
- 16h
Environment
- Operating Temperature Range
- -40 to +65 °C
Values are normalised to SI-style units. Open a value's source marker for provenance and confidence. Additional specifications are shown as published by the source, without unit conversion. Spotted an error? Report it to us, tell the manufacturer or claim this listing.
- Software & SDKs
- EMLID Mobile App
Ask 3DXR about EMLID Reach RS4
AHRS
The VectorNav IMU/AHRS supplies high‑rate, low‑noise inertial data for autonomous navigation in drones, missiles, and other platforms.
APNT
APNT solutions deliver resilient positioning, navigation, and timing in environments where GNSS signals are jammed, spoofed or unavailable, enabling mission-critical operations for defense, aerospace, and autonomous platforms.
Agam GNSS Base RTK
The Agam GNSS Base RTK is a UART‑based GPS/GNSS module featuring the u‑Blox ZED‑F9P receiver, designed for use as an RTK base or rover with multi‑constellation support and sub‑centimetre accuracy.
Agam GNSS01 CAN
The Agam GNSS01 CAN is a Made‑in‑India GPS/GNSS module built around the NEO‑M9N chipset, featuring an integrated IMU, barometer, magnetometer, safety switch and buzzer with a CAN interface for seamless integration into any CAN‑based autopilot.