EVK-F10
A rugged evaluation kit for u-blox F10 GNSS chips featuring a metal housing, multiple I/O interfaces, and power‑consumption monitoring.
- Price
- Price on request
- Availability
- In production
- Origin
- Collected automatically
- Source
- Manufacturer page (u-blox.com) +1 more
- Retrieved
- 25 Sept 2026
- Last checked
- 25 Sept 2026
- Report
- Report an error or request removal
The EVK‑F10 is a compact (105 × 64 × 26 mm) board that allows developers to evaluate the L1/L5 dual‑band performance of u‑blox F10 chips. It includes a rugged metal case, a 14‑pin front connector for SPI/I2C and other I/O, power‑consumption sensors, and USB/RS232 interfaces for connectivity with the u‑center software. The kit is designed to simplify integration and debugging of high‑precision GNSS solutions.
Physical
- Dimensions
- 105 x 64 x 26 mm
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Communications
- Interfaces
- USB, RS232, SPI/I2C
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 26 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Mechanical
- Rugged metal housing
- Yes
Electrical
- On‑board power consumption sensors
- Yes
- Power supplied via USB interface
- Yes
Electronics
- 14‑pin front connector for interface pins
- 14
Software
- Supports u‑center software for configuration and debugging
- Yes
Values are normalised to SI-style units. Open a value's source marker for provenance and confidence. Additional specifications are shown as published by the source, without unit conversion. Spotted an error? Report it to us, tell the manufacturer or claim this listing.
- Software & SDKs
- u-center
Ask u-blox about EVK-F10
AHRS
The VectorNav IMU/AHRS supplies high‑rate, low‑noise inertial data for autonomous navigation in drones, missiles, and other platforms.
APNT
APNT solutions deliver resilient positioning, navigation, and timing in environments where GNSS signals are jammed, spoofed or unavailable, enabling mission-critical operations for defense, aerospace, and autonomous platforms.
Agam GNSS Base RTK
The Agam GNSS Base RTK is a UART‑based GPS/GNSS module featuring the u‑Blox ZED‑F9P receiver, designed for use as an RTK base or rover with multi‑constellation support and sub‑centimetre accuracy.
Agam GNSS01 CAN
The Agam GNSS01 CAN is a Made‑in‑India GPS/GNSS module built around the NEO‑M9N chipset, featuring an integrated IMU, barometer, magnetometer, safety switch and buzzer with a CAN interface for seamless integration into any CAN‑based autopilot.