VN-300
A miniature dual‑antenna GNSS‑assisted inertial navigation system that delivers high‑accuracy position, velocity, and orientation data for both static and dynamic applications.
- Price
- Price on request
- Availability
- In production
- Lead time
- 1 business day
- Origin
- Collected automatically
- Source
- Manufacturer page (vectornav.com) +1 more
- Retrieved
- 25 Sept 2026
- Last checked
- 25 Sept 2026
- Report
- Report an error or request removal
The VN‑300 combines MEMS inertial sensors with two high‑sensitivity GNSS receivers (GPS L1 C/A and Galileo E1) and advanced Kalman filtering to provide precise heading and attitude estimates. It offers 0.15° static heading accuracy, 0.2° dynamic heading accuracy, and 0.03° pitch/roll accuracy, with navigation data output at 400 Hz. Ultra‑low SWaP (volume <21.8 cm³, weight <30 g, power <1.5 W) enables plug‑and‑play integration in compact electronic assemblies.
Physical
- Weight
- 0kg
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Payload
- Sensor
- MEMS inertial sensors + dual GNSS receivers
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Environment
- Min. operating temp.
- -40°C
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
- Max. operating temp.
- 85°C
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Power
- Power consumption
- 1.5W
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 80%
Collected automatically from the source; not reviewed yet.
Compliance/certification
- Remote ID
- Not supported
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- Medium · 75%
Collected automatically from the source; not reviewed yet.
- Country of origin
- US
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- High · 90%
Collected automatically from the source; not reviewed yet.
- Manufactured in
- US
Source
- Source
- Manufacturer page
- Retrieved
- 25 Sept 2026
- Last reviewed
- 25 Sept 2026
- Confidence
- High · 90%
Collected automatically from the source; not reviewed yet.
Sensor Summary
- SBAS
- L1 C/A
- Data output format
- ASCII (VectorNav), NMEA-0183, Binary (VectorNav)
Performance
- Heading Accuracy (static)
- 0.15°
- Heading Accuracy (dynamic)
- 0.2°
- Pitch/Roll Accuracy (dynamic)
- 0.03°
- Navigation Data Output Frequency
- 400Hz
- IMU Data Output Frequency
- 400Hz
Physical
- Volume (SWaP)
- 21.8cm³
- Weight
- 30g
Connectivity
- Interface Connector
- 10‑pin locking connector
- External Antenna Connectors
- two MMCX connectors for active GPS antennas
Software
- Supported Message Formats
- ASCII, NMEA‑0183, VectorNav Binary
Build & Location
- Operating Temperature Range
- -40 °C to +85 °C
- Manufacturing Origin
- USA
Availability
- Shipping Time
- within 1 business day
Compliance
- ITAR Status
- ITAR‑free
Values are normalised to SI-style units. Open a value's source marker for provenance and confidence. Additional specifications are shown as published by the source, without unit conversion. Spotted an error? Report it to us, tell the manufacturer or claim this listing.
- Software & SDKs
- VectorNav Control CenterVectorNav SDK
Ask VectorNav Technologies about VN-300
AHRS
The VectorNav IMU/AHRS supplies high‑rate, low‑noise inertial data for autonomous navigation in drones, missiles, and other platforms.
APNT
APNT solutions deliver resilient positioning, navigation, and timing in environments where GNSS signals are jammed, spoofed or unavailable, enabling mission-critical operations for defense, aerospace, and autonomous platforms.
Agam GNSS Base RTK
The Agam GNSS Base RTK is a UART‑based GPS/GNSS module featuring the u‑Blox ZED‑F9P receiver, designed for use as an RTK base or rover with multi‑constellation support and sub‑centimetre accuracy.
Agam GNSS01 CAN
The Agam GNSS01 CAN is a Made‑in‑India GPS/GNSS module built around the NEO‑M9N chipset, featuring an integrated IMU, barometer, magnetometer, safety switch and buzzer with a CAN interface for seamless integration into any CAN‑based autopilot.